Installing RedBeam

There are several things to keep in mind before you install your RedBeam application:
 
Step 1
You must be logged in as a Local Windows Admin(Not a debugger user Admin) on the machine you are installing it on. You can look at your user account to check if it says admin next to your account. If you are not an admin you should ask your IT department if they can give you access.
 
Step 2
If you have a Windows Vista, Windows 7 or Windows 8 machine you must disable the User Account Control (UAC). This will require a reboot of the PC before the change can take place.
 
 uac
 
Step 3
Disable all firewalls. Note: If you click your start button and type services.msc into your run bar (Windows XP) or start search bar (Windows Vista/7/8), you can see what firewalls are running and can stop and disable them.
 
Step 4
Disable all firewalls. Note: If you click your start button and type services.msc into your run bar (Windows XP) or start search bar (Windows Vista/7), you can see what firewalls are running and can stop and disable them.
 
Step 5
Place the CD in the CD ROM Drive and access the CD ROM folder.
 
Step 6
Open and view or print the User Manual. RedBeam recommends reading the user manual before installing the software.
 
Step 7
Double click on the setup icon. Follow the instructions to install the software.
 
If you experience any issues during installation, please call RedBeam Technical Support at 877-373-0390 and select option 2.